View source for Left rear console

== F16 Left Rear console input breakout board ==

'''Features:''' 

*connects to one [[KEY64D_PH]] board
*each panel has its own connector
*connectors: pin headers for IDC ribbon flat cables 
*board size: 80x100mm (1/2 euro size)

== 3D view of board  ==

[[Image:Breakout_left_rear_3d.jpg |thumb|center|500px|Rev.0 3D view]]

== Schematic and Layout  ==

[[Image:Breakout_left_rear_sch.PNG |thumb|center|500px|Rev.0 schematics]]
<br/>
[[Image:Breakout_left_rear_brd.PNG |thumb|center|500px|Rev.0 Layout]]

==Bill of Materials ==

TBA

== Wiring the breakout board  ==

*'''Wiring the breakout board to the KEY64D_PH:'''

one 14 pin cable connects from the KEY64D_PH common to the breakout board common, the rest of the 14 pin cables connect to either of the 14 pin headers on the board. 

*'''Wiring the panels to the breakout board&nbsp;:'''

2 types of connectors are available&nbsp;: 10 pin connector and 20 pin connector. 

'''10 pin connector:''' connecting the panel to the 10 pin header requires connecting the common to pin 1 and 10. all the switches connect to pins 2-9&nbsp;: not all pins are available on all pin headers, but the count always starts from 2 and on. 

'''20 pin connector:''' common pins are 1 and 2, pins and 4 are not used. pin 1 is common for the uneven pins - 5,7,9,11,13,15,17,19 pin 2 is common to the even pins - 6,8,10,12,14,16,18,20 on the 20 pin header all the pins are always available.